<![CDATA[BoatTrailerParts.com: ]]> https://www.boattrailerparts.com Wed, 7 Oct 2026 00:00:00 EST en-us <![CDATA[Steel Diamond Plate Square Trailer Fender Single Axle 10 x 32 x 13]]> https://www.boattrailerparts.com/Steel-Diamond-Plate-Square-Trailer-Fender-Single-Axle-10-x-32-x-13_p_215.html Wed, 7 Oct 2026 00:00:00 EST This is a 14 Gauge Steel Diamond Plate Square Boat Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Squ...[Read More]
Our Price: $31.76 [Add to Cart]


]]> https://www.boattrailerparts.com/Steel-Diamond-Plate-Square-Trailer-Fender-Single-Axle-10-x-32-x-13_p_215.html This is a 14 Gauge Steel Diamond Plate Square Boat Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Squ...[Read More]
Our Price: $31.76 [Add to Cart]


]]> This is a 14 Gauge Steel Diamond Plate Square Boat Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Square Style Trailer Fender has the advantage of strength and durability over some other types of fenders. As seen in the pictures, this fender measures 10 inches wide, 32 inches long, and 13 inches high from the ground to the top of the fender. As far as installation of this fender, there are many ways. Both sides of this fender are slightly rounded but still present a flat surface, allowing for an easy welding surface, or even a bolt-on surface. In addition, sometimes fender brackets are welded to the trailers frame on the front and back of the fenders location. Check the measurements in the images to ensure this is the proper trailer fender for your application. ]]> <![CDATA[ Steel Diamond Plate Round Trailer Fender Single Axle 9in x 31in x 15in]]> https://www.boattrailerparts.com/-Steel-Diamond-Plate-Round-Trailer-Fender-Single-Axle-9in-x-31in-x-15in_p_216.html Wed, 7 Oct 2026 00:00:00 EST This is a 14 Gauge Steel Diamond Plate Round Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Round Sty...[Read More]
Our Price: $29.82 [Add to Cart]


]]> https://www.boattrailerparts.com/-Steel-Diamond-Plate-Round-Trailer-Fender-Single-Axle-9in-x-31in-x-15in_p_216.html This is a 14 Gauge Steel Diamond Plate Round Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Round Sty...[Read More]
Our Price: $29.82 [Add to Cart]


]]> This is a 14 Gauge Steel Diamond Plate Round Trailer Fender. This fender size, as long as it is installed at the proper location and height, will accommodate most trailer tire sizes from 13 inch to 15 inch trailer tires. This 14 Gauge Steel Round Style Trailer Fender has the advantage of strength and durability over some other types of fenders. As seen in the pictures, this fender measures 9 inches wide, 31 inches long, and 15 inches high from the ground to the top of the fender. As far as installation of this fender, there are many ways. Check the pictures and you will notice that one side of this Round Steel Trailer Fender is rounded, while the other side is flattened. The side that is flat is your weld on or bolt on surface. In addition, sometimes fender brackets are welded to the trailers frame on the front and back of the fenders location. Check the measurements in the images to ensure this is the proper trailer fender for your application. ]]> <![CDATA[Aluminum Diamond Plate Tandem Axle Boat Trailer Fender 9 x 60 x 15]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Tandem-Axle-Boat-Trailer-Fender-9-x-60-x-15_p_217.html Wed, 7 Oct 2026 00:00:00 EST This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $108.87 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Tandem-Axle-Boat-Trailer-Fender-9-x-60-x-15_p_217.html This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $108.87 [Add to Cart]


]]> This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.
As shown in the picture this boat trailer fender measures 9 inches wide x 60 inches long x 15 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets and supports, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) and additional Aluminum Boat Trailer Square Fender Mount and Step Pad 15 inch. These are an example of how an Aluminum Tandem Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Steel Diamond Plate Trailer Fender Tandem Axle 10 x 72 x 13]]> https://www.boattrailerparts.com/Steel-Diamond-Plate-Trailer-Fender-Tandem-Axle-10-x-72-x-13_p_218.html Wed, 7 Oct 2026 00:00:00 EST This is a Tandem Axle Steel Diamond Plate Trailer Fender. This Dual Axle Fender is made of 14 Gauge Steel. This Fender measures 10 inches wide x 72 inches long x 13 inches tall. If your looking for a Heavy Duty Steel Fender for your tandem axle trail...[Read More]
Our Price: $59.54 [Add to Cart]


]]> https://www.boattrailerparts.com/Steel-Diamond-Plate-Trailer-Fender-Tandem-Axle-10-x-72-x-13_p_218.html This is a Tandem Axle Steel Diamond Plate Trailer Fender. This Dual Axle Fender is made of 14 Gauge Steel. This Fender measures 10 inches wide x 72 inches long x 13 inches tall. If your looking for a Heavy Duty Steel Fender for your tandem axle trail...[Read More]
Our Price: $59.54 [Add to Cart]


]]> This is a Tandem Axle Steel Diamond Plate Trailer Fender. This Dual Axle Fender is made of 14 Gauge Steel. This Fender measures 10 inches wide x 72 inches long x 13 inches tall. If your looking for a Heavy Duty Steel Fender for your tandem axle trailer this is the one for you. Most commonly this style of fender is welded to the trailers frame at several points, or to brackets that are welded to the trailers frame. Both sides of this fender are able to be used as a welding surface. ]]> <![CDATA[Aluminum Diamond Plate Tandem Axle Boat Trailer Fender 9 x 62 x 14]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Tandem-Axle-Boat-Trailer-Fender-9-x-62-x-14_p_219.html Wed, 7 Oct 2026 00:00:00 EST This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $109.96 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Tandem-Axle-Boat-Trailer-Fender-9-x-62-x-14_p_219.html This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $109.96 [Add to Cart]


]]> This is a Tandem Axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 9 inches wide x 62 inches long x 14 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets and supports, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) and additional Aluminum Boat Trailer Fender Support 16 inch for Tandem Axle. These are an example of how an Aluminum Tandem Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.


]]> <![CDATA[Aluminum Diamond Plate Square Trailer Fender Tandem 10 x 68 x 16]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Square-Trailer-Fender-Tandem-10-x-68-x-16_p_220.html Wed, 7 Oct 2026 00:00:00 EST This is a tandem axle Square Aluminum Diamond Plate Trailer Fender. Aluminum Dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweig...[Read More]
Our Price: $183.56 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Square-Trailer-Fender-Tandem-10-x-68-x-16_p_220.html This is a tandem axle Square Aluminum Diamond Plate Trailer Fender. Aluminum Dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweig...[Read More]
Our Price: $183.56 [Add to Cart]


]]> This is a tandem axle Square Aluminum Diamond Plate Trailer Fender. Aluminum Dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. these are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 10 inches wide x 68 inches long x 16 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets and supports, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) and additional Aluminum Boat Trailer Fender Support 16 inch for Tandem Axle. These are an example of how an Aluminum Tandem Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Aluminum Diamond Plate Boat Trailer Fender Tandem Axle 10 x 64 x 13]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Tandem-Axle-10-x-64-x-13_p_221.html Wed, 7 Oct 2026 00:00:00 EST This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $62.08 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Tandem-Axle-10-x-64-x-13_p_221.html This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $62.08 [Add to Cart]


]]> This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 10 inches wide x 64 inches long x 13 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets and supports, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) and additional Aluminum Boat Trailer Fender Support 16 inch for Tandem Axle. These are an example of how an Aluminum Tandem Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Galvanized Boat Trailer Fender Tandem Axle 9 in x 60 in x 12 in ]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Tandem-Axle-9-in-x-60-in-x-12-in-_p_225.html Wed, 7 Oct 2026 00:00:00 EST This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $43.86 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Tandem-Axle-9-in-x-60-in-x-12-in-_p_225.html This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $43.86 [Add to Cart]


]]> This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.
This Particular Trailer Fender measures 9 inches wide x 60 inches long x 12 inches high.

Most commonly 13 to 15 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Galvanized Boat Trailer Fender Tandem Axle 10 in x 64 in x 16 in]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Tandem-Axle-10-in-x-64-in-x-16-in_p_227.html Wed, 7 Oct 2026 00:00:00 EST This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $133.70 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Tandem-Axle-10-in-x-64-in-x-16-in_p_227.html This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $133.70 [Add to Cart]


]]> This is a Tandem Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 10 inches wide x 64 inches long x 16 inches high.

Most commonly 13 to 15 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Aluminum Diamond Plate Boat Trailer Fender Single Axle 10 x 32 x 14 3/4 inch]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-10-x-32-x-14-34-inch_p_228.html Wed, 7 Oct 2026 00:00:00 EST This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $106.75 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-10-x-32-x-14-34-inch_p_228.html This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $106.75 [Add to Cart]


]]> This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 10 inches wide x 32 inches long x 14 3/4 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you. This Fender is rounded on each edge, meaning there is not a flat side and a round side, but both round sides. Commonly Fenders with one flat side and one round side are more ideal for enclosed trailers.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) or additional Boat Trailer Fender Mounting Brackets These are an example of how an Aluminum Single Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.

Specs:
- Aluminum Diamond Plate
- 12 gauge (0.0808" thick)
]]> <![CDATA[Aluminum Diamond Plate Boat Trailer Fender Single Axle 10 x 34 x 16 1/2]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-10-x-34-x-16-12_p_229.html Wed, 7 Oct 2026 00:00:00 EST This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $46.13 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-10-x-34-x-16-12_p_229.html This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $46.13 [Add to Cart]


]]> This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 10 inches wide x 34 inches long x 16 1/2 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you. This Fender is rounded on each edge, meaning there is not a flat side and a round side, but both round sides. Commonly Fenders with one flat side and one round side are more ideal for enclosed trailers.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) or additional Boat Trailer Fender Mounting Brackets These are an example of how an Aluminum Single Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Aluminum Diamond Plate Round Boat Trailer Fender Single Axle 31 inch]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Round-Boat-Trailer-Fender-Single-Axle-31-inch_p_230.html Wed, 7 Oct 2026 00:00:00 EST This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $41.55 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Round-Boat-Trailer-Fender-Single-Axle-31-inch_p_230.html This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $41.55 [Add to Cart]


]]> This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 9 inches wide x 31 inches long x 15 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you. This Fender is rounded on each edge, meaning there is not a flat side and a round side, but both round sides. Commonly Fenders with one flat side and one round side are more ideal for enclosed trailers.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) or additional Boat Trailer Fender Mounting Brackets These are an example of how an Aluminum Single Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not depending on the stock we have on hand at the moment. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Aluminum Diamond Plate Boat Trailer Fender Single Axle 8 x 24 x 8 1/4]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-8-x-24-x-8-14_p_359.html Wed, 7 Oct 2026 00:00:00 EST This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $29.54 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Single-Axle-8-x-24-x-8-14_p_359.html This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Alu...[Read More]
Our Price: $29.54 [Add to Cart]


]]> This is a Single axle Aluminum Diamond Plate Boat Trailer Fender. Aluminum Diamond Plate Single axle trailer fenders are most commonly found and sold for Boat Trailers. However they are also suitable for enclosed trailers or utility trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 8 inch to 12 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 8 inches wide x 24 inches long x 8 1/4 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of to see if one particular style strikes you. This Fender is rounded on each edge, meaning there is not a flat side and a round side, but both round sides. Commonly Fenders with one flat side and one round side are more ideal for enclosed trailers.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) or additional Boat Trailer Fender Mounting Brackets These are an example of how an Aluminum Single Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[Galvanized Boat Trailer Fender Single Axle 7 in x 23 1/2 in x 8 in]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-7-in-x-23-12-in-x-8-in_p_361.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $34.82 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-7-in-x-23-12-in-x-8-in_p_361.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $34.82 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 7 inches wide x 23 1/2 inches long x 8 inches high.

Most commonly 8 to 12 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.
]]> <![CDATA[Galvanized Boat Trailer Fender 9 in x 29 in x 11 3/4 in]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-9-in-x-29-in-x-11-34-in_p_362.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $46.06 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-9-in-x-29-in-x-11-34-in_p_362.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $46.06 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 gauge galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 9 inches wide x 29 inches long x 11 3/4 inches high.

Most commonly 13 to 14 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Galvanized Boat Trailer Fender Single Axle 8 inch x 28 inch x 10 inch]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-8-inch-x-28-inch-x-10-inch_p_363.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $41.21 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-8-inch-x-28-inch-x-10-inch_p_363.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $41.21 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 8 inches wide x 28 inches long x 10 inches high.

Most commonly 10 to 13 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Galvanized Boat Trailer Fender Single Axle 9in x 31 1/2in x 16 1/4in]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-9in-x-31-12in-x-16-14in_p_364.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $36.05 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-9in-x-31-12in-x-16-14in_p_364.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $36.05 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 9 inches wide x 31 1/2 inches long x 16 1/4 inches high.

Most commonly 13 to 14 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Galvanized Boat Trailer Fender Single Axle 7 x 23 1/2 x 6 1/2 ]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-7-x-23-12-x-6-12-_p_365.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $19.24 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Boat-Trailer-Fender-Single-Axle-7-x-23-12-x-6-12-_p_365.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $19.24 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 7 inches wide x 23 1/2 inches long x 6 1/2 inches high.

Most commonly 10 to 12 inch trailer tires are associated with tandem axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Galvanized Single Axle Boat Trailer Fender 10 inch x 29 inch x 10 inch]]> https://www.boattrailerparts.com/Galvanized-Single-Axle-Boat-Trailer-Fender-10-inch-x-29-inch-x-10-inch_p_368.html Wed, 7 Oct 2026 00:00:00 EST This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $48.52 [Add to Cart]


]]> https://www.boattrailerparts.com/Galvanized-Single-Axle-Boat-Trailer-Fender-10-inch-x-29-inch-x-10-inch_p_368.html This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion ...[Read More]
Our Price: $48.52 [Add to Cart]


]]> This is a Single Axle Galvanized Boat Trailer Fender. This fender is 16 Gauge Galvanized Steel. Galvanized Coated fenders are excellent for use in the marine environment. Having a Galvanized Coating on your fender will significantly reduce corrosion and rust caused by saltwater. This 16 Gauge Galvanized Boat Trailer Fender is also very sturdy, ideal for protecting your boat from road debris.

This Particular Trailer Fender measures 10 inches wide x 29 inches long x 10 inches high.

Most commonly 13 to 14 inch trailer tires are associated with single axle fenders on boat trailers. Also, keep in mind when replacing a fender, or adding fenders, additional hardware will be needed. For Example, you will need bolts to mount the fender to whatever brackets you will be using. We have Boat Trailer Fender Mounting Brackets available in many sizes. Check them out to figure out which will work for your installation. Some brackets may require using Boat Trailer U-Bolts and Boat Trailer Bolts to finish mounting the fender to the trailer frame.
When determining the length and height of fender, keep in mind the spacing between the two mounting points. Basically the distance between them is the shortest your fender can be in order to mount, unless you are planning on moving those brackets for a shorter fender. Also, be mindful of the height of your trailer fender in relation to your boat hull, it is important that you re-mount your new fender in nearly the exact same location if there is limited room for movement For instance, if you mount your fender to low, your tires may impact it when you hit a bump or backing down the ramp. If you mount them to high, you may risk damaging your boat hull if the hull impacts the fenders.

Most of our trailer fenders do not come with pre-drilled holes. You will need to drill holes in the correct location for mounting.
]]> <![CDATA[Cold Rolled Steel Single Axle Utility Trailer Fender 10 3/4 x 32 x 16]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Single-Axle-Utility-Trailer-Fender-10-34-x-32-x-16_p_370.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $38.03 [Add to Cart]


]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Single-Axle-Utility-Trailer-Fender-10-34-x-32-x-16_p_370.html This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $38.03 [Add to Cart]


]]> This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very common on enclosed trailers and utility trailers.

This Fender measures 10 3/4 inches wide x 32 inches long x 16 inches tall. This fender typically mounts around 13 to 15 inches trailer tires. You will see in the images that this fender has one edge that is rounded, and the opposite end is flat, for welding towards the trailer. We have several other size Cold Rolled Steel Single Axle Utility Trailer Fenders so check the dimensions and select the best fit for your trailer.
]]> <![CDATA[Cold Rolled Steel Trailer Fender Smooth 8 inch x 28 inch x 10 inch]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Smooth-8-inch-x-28-inch-x-10-inch_p_372.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $16.61 [Add to Cart]


]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Smooth-8-inch-x-28-inch-x-10-inch_p_372.html This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $16.61 [Add to Cart]


]]> This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very common on enclosed trailers and utility trailers.

This Fender measures 8 inches wide x 28 inches long x 10 inches tall. This fender typically mounts around 13 to 15 inches trailer tires. You will see in the images that this fender has one edge that is rounded, and the opposite end is flat, for welding towards the trailer. We have several other size Cold Rolled Steel Single Axle Utility Trailer Fenders so check the dimensions and select the best fit for your trailer.
]]> <![CDATA[Cold Rolled Steel Trailer Fender Single Axle 9 in x 32 in x 15 in]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Single-Axle-9-in-x-32-in-x-15-in_p_373.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $21.32 [Add to Cart]


]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Single-Axle-9-in-x-32-in-x-15-in_p_373.html This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $21.32 [Add to Cart]


]]> This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very common on enclosed trailers and utility trailers.

This Fender measures 9 inches wide x 32 inches long x 15 inches tall. This fender typically mounts around 13 to 15 inches trailer tires. You will see in the images that this fender has one edge that is rounded, and the opposite end is flat, for welding towards the trailer. We have several other size Cold Rolled Steel Single Axle Utility Trailer Fenders so check the dimensions and select the best fit for your trailer.
]]> <![CDATA[Cold Rolled Steel Trailer Fender Small Utility 7 in x 21 in x 6 in]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Small-Utility-7-in-x-21-in-x-6-in_p_375.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $13.24 [Add to Cart]


]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Small-Utility-7-in-x-21-in-x-6-in_p_375.html This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very com...[Read More]
Our Price: $13.24 [Add to Cart]


]]> This is a Cold Rolled Steel Round Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very common on smaller utility trailers and deck trailers.

This Fender measures 7 inches wide x 21 inches long x 6 inches tall. This fender typically mounts around 8 to 12 inches trailer tires. You will see in the images that this fender has two rounded but flat edges. Both sides are suitable for welding to the trailer. We have several other size Cold Rolled Steel Single Axle Utility Trailer Fenders so check the dimensions and select the best fit for your trailer.
]]> <![CDATA[Cold Rolled Steel Trailer Fender Square 10 inch x 32 inch x 13 inch]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Square-10-inch-x-32-inch-x-13-inch_p_377.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Square Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very co...[Read More]
Our Price: $42.91 [Add to Cart]


]]> https://www.boattrailerparts.com/Cold-Rolled-Steel-Trailer-Fender-Square-10-inch-x-32-inch-x-13-inch_p_377.html This is a Cold Rolled Steel Square Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very co...[Read More]
Our Price: $42.91 [Add to Cart]


]]> This is a Cold Rolled Steel Square Utility Trailer Fender. This fender is made of 16 Gauge Cold Rolled Steel. These fenders are designed for weld-on applications and are suitable for painting. These Single Axle Steel Round Trailer Fenders are very common on smaller utility trailers and deck trailers.

This Fender measures 10 inches wide x 32 inches long x 13 inches tall. This fender typically mounts around 13 to 14 inches trailer tires. You will see in the images that this fender has two rounded but flat edges. Both sides are suitable for welding to the trailer. We have several other size Cold Rolled Steel Single Axle Utility Trailer Fenders so check the dimensions and select the best fit for your trailer.
]]> <![CDATA[Aluminum Diamond Plate Boat Trailer Fender Tandem Axle 10 x 68 x 16 ]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Tandem-Axle-10-x-68-x-16-_p_778.html Wed, 7 Oct 2026 00:00:00 EST This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $155.12 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Diamond-Plate-Boat-Trailer-Fender-Tandem-Axle-10-x-68-x-16-_p_778.html This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, dur...[Read More]
Our Price: $155.12 [Add to Cart]


]]> This is a tandem axle Aluminum Diamond Plate Trailer Fender. Aluminum dual axle trailer fenders are most commonly found and sold for Boat Trailers. The Aluminum Construction is completely ideal for boat trailers because the fender is lightweight, durable, and will not rust! We have these available in many sizes so check the specs in the picture and be sure this one will work for your boat trailer. These are commonly seen protecting 13 inch to 15 inch trailer tires. Typically replacing a boat trailer fender means a tire blew out or the old fender rusted through. Keep in mind when doing this project you may need additional hardware to complete the installation.

As shown in the picture this boat trailer fender measures 10 inches wide x 68 inches long x 16 inches tall. When choosing the correct size be mindful of the distance between mounting points on your trailer, as this is the minimum length your fender can be, unless your shortening that length by moving the brackets.

Aluminum Diamond Plate Fenders mount to a boat trailers frame in a variety of ways. In some cases there are brackets already bolted or welded to the trailers frame to which you will simply bolt the replacement fender using Boat Trailer Bolts and you will be good to go. However, sometimes you find yourself in a situation where you need alternative methods of mounting your fender to your trailer. Check out our selection of Boat Trailer Fender Mounting Brackets to see if one particular style strikes you.

If you are mounting this Tandem Axle Aluminum Fender to a Boat Trailer that has an I-Beam frame, and you need mounting brackets and supports, check out Aluminum Boat Trailer Round Fender Mount and Step Par (PAIR) and additional Aluminum Boat Trailer Fender Support 16 inch for Tandem Axle. These are an example of how an Aluminum Tandem Axle Boat Trailer Fender might mount to a trailers frame. You can also use these with other trailer frames to; such as square tubing and channel frames. These items mount to the trailer frame using Boat Trailer U-Bolts and Boat Trailer Bolts. Check your frames dimensions to get the precise size mounting hardware you will need. For Optimal results, use Stainless Steel mounting hardware, as it also will not rust!

Keep in mind when mounting your fender to your trailer to leave enough space above the trailer tires. As your trailer goes over bumps, down ramps, or any area that causes the springs or torsion arms to flex, your tires will travel upward. You want to be mindful of this to ensure your tires will not rub against your fender. Also, be mindful of your fenders location in relation to your boats hull. In most cases the trailer manufacturer placed your trailer fenders in a precise location on purpose, sometimes very close to the hull of the boat. They do this to keep the ride height of your boat as low as safely possible, for better trailering and easier unloading and loading. If you are not mindful of this, and decide to do the replacement with the boat off the trailer, it is possible that you may mount your new fender in a position where the boat will impact the fender once you load the boat back on the trailer.

Some of our fenders come with pre-drilled holes, others do not. Therefore you may need to drill holes in the ends of the fenders for installation, which can be done with any generic electric drill. Also, installing the Aluminum Fender Steps to mount your trailer fenders will require drilling mounting holes, as the fender steps do not have any pre-drilled holes.

Having fenders is essential to the trailering of your boat. Trailer fenders are a sure way to protect your boat from debris kicked up by the trailer tires. Also, a very important factor is the legal aspects, as trailers are required to have fenders around the tires.
]]> <![CDATA[3/8 inch Diameter by 1 1/4 inch Long Stainless Steel Bolt ]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Stainless-Steel-Bolt-_p_976.html Wed, 7 Oct 2026 00:00:00 EST This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the b...[Read More]
Our Price: $1.67 [Add to Cart]


]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Stainless-Steel-Bolt-_p_976.html This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the b...[Read More]
Our Price: $1.67 [Add to Cart]


]]> This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt you are needing to complete your project. This listing is for (1) Bolt and also includes (2) Stainless Steel Washers, (1) Stainless Steel Lock Washer, and (1) Stainless Steel Hex Nut
A: 1 1/4 inches
D: 3/8-16 Thread

]]> <![CDATA[3/8 inch Diameter by 1 1/4 inch Long Zinc Plated Bolt ]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Zinc-Plated-Bolt-_p_987.html Wed, 7 Oct 2026 00:00:00 EST This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt ...[Read More]
Our Price: $1.89 [Add to Cart]


]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Zinc-Plated-Bolt-_p_987.html This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt ...[Read More]
Our Price: $1.89 [Add to Cart]


]]> This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt you are needing to complete your project. This listing is for (1) Bolt and also includes (2) Galvanized Flat Washers, (1) Galvanized Lock Washer, and (1) Zinc Plated Hex Nut
A: 1 1/4 inches
D: 3/8-16 Thread
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 5 1/4 in x 6 inch L Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-5-14-in-x-6-inch-L-Shape_p_1078.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axl...[Read More]
Our Price: $8.15 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-5-14-in-x-6-inch-L-Shape_p_1078.html This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axl...[Read More]
Our Price: $8.15 [Add to Cart]


]]> This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat trailer, you would use two of these fender brackets to mount your Single Axle Trailer Fenders. These Galvanized Fender Brackets are most commonly seen on smaller Galvanized and Aluminum Fenders used for 13 inch tires and down to 8 inch trailer tires. You would mount one towards the front and one towards the rear of the fender , we have Boat Trailer U-Bolts and Trailer Bolts available if you are needing mounting hardware.
Be sure to check the pictures to make sure the measurements in the photo are the correct size and spacing for your project. This is a listing for (1) Bracket, you would commonly need (2) to replace an entire fender.
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 7 1/2 in x 5 3/4 inch L Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-7-12-in-x-5-34-inch-L-Shape_p_1079.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat t...[Read More]
Our Price: $10.45 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-7-12-in-x-5-34-inch-L-Shape_p_1079.html This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat t...[Read More]
Our Price: $10.45 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat trailer, you would use two of these fender brackets to mount your Single Axle Trailer Fenders. These Galvanized L Shape Fender Brackets are most commonly seen on smaller Galvanized and Aluminum Fenders used for 13 inch tires and down to 8 inch trailer tires. You would mount one towards the front and one towards the rear of the fender , we have Boat Trailer U-Bolts and Trailer Bolts available if you are needing mounting hardware. The holes that are pre-drilled in this fender bracket are for 3/8 inch diameter bolts. This Single Axle Fender Bracket is very similar to another one we have available, but measures longer on both leg portions and has different hole spacing, so be careful identify which one is more ideal for your application.
Be sure to check the pictures to make sure the measurements in the photo are the correct size and spacing for your project. This is a listing for (1) Bracket, you would commonly need (2) to replace an entire fender.
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 4 in x 7 1/2 inch L-Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-4-in-x-7-12-inch-L-Shape_p_1080.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bol...[Read More]
Our Price: $6.51 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-4-in-x-7-12-inch-L-Shape_p_1080.html This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bol...[Read More]
Our Price: $6.51 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bolts for mounting. The correct Boat Trailer U-Bolt or Trailer Bolt is 3/8 inch in diameter. Check the pictures with the lengths of the bracket to ensure this one will work for you. Typically you would need (2) of these brackets in order to replace one trailer fender. This listing is one for (1) Fender bracket. If you are needing to replace your trailer fenders as well check out our Single Axle Trailer Fenders to select the correct size you are looking for. ]]> <![CDATA[Boat Trailer Fender Bracket with Double Bend Large for Single Axle ]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Bracket-with-Double-Bend-Large-for-Single-Axle-_p_1082.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This sligh...[Read More]
Our Price: $15.47 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Bracket-with-Double-Bend-Large-for-Single-Axle-_p_1082.html This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This sligh...[Read More]
Our Price: $15.47 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This slightly rounded Fender Bracket is slightly angled to mount your trailers fender. Each bend that you see is roughly 45 Degrees. The correct Boat Trailer U-Bolt or Trailer Bolt is 3/8 inch in diameter. Be sure to check the correct length of U-Bolt or Bolts you will need, as we have many sizes available. Check the pictures with the lengths of the bracket to ensure this one will work for you. Typically you would need (2) of these brackets in order to replace one single axle trailer fender. However, smaller fenders may mount using (1) fender bracket. This listing is one for (1) Fender bracket. If you are needing to replace your trailer fenders as well check out our Single Axle Trailer Fenders to select the correct size you are looking for. ]]> <![CDATA[Boat Trailer Galvanized Fender Mounting Bracket Step Pad]]> https://www.boattrailerparts.com/Boat-Trailer-Galvanized-Fender-Mounting-Bracket-Step-Pad_p_1083.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your si...[Read More]
Our Price: $13.31 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Galvanized-Fender-Mounting-Bracket-Step-Pad_p_1083.html This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your si...[Read More]
Our Price: $13.31 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your single axle boat trailer. This Fender bracket has varying holes diameters and spacing, which are shown on the images, so select hardware carefully, measure the Boat Trailer U-Bolts and Trailer Bolts to ensure a successful install. Also, keep in mind these are normally replaced in pairs while replacing your Single Axle Trailer Fenders. The holes you see on the top surface of the fender bracket are the ones you would use to mount this bracket to the frame. Therefore, the side with the two holes on top faces the trailer frame, with the other end, (where you see the two slotted 3/8 inch holes) mounting the trailer fenders. ]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 15 inch for Tandem Axle]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-15-inch-for-Tandem-Axle_p_1084.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $11.96 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-15-inch-for-Tandem-Axle_p_1084.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $11.96 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 17 inch for Tandem Axle ]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-17-inch-for-Tandem-Axle-_p_1085.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $13.66 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-17-inch-for-Tandem-Axle-_p_1085.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $13.66 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
]]> <![CDATA[Aluminum Boat Trailer Square Fender Mount and Step Pad 15 inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-inch_p_1087.html Wed, 7 Oct 2026 00:00:00 EST This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the...[Read More]
Our Price: $30.05 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-inch_p_1087.html This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the...[Read More]
Our Price: $30.05 [Add to Cart]


]]> This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the trailer. Most commonly this square fender pad mounts with Trailer Bolts to the I-Beam of a boat trailer on the side that does not have the black cover pad. This allows the other side to be used as a safe step, and a flat square surface to mount the trailer fender. Check the attached images to ensure this is the product for you. These are also available with angles to accommodate round trailer fenders. You would commonly need (2) of these to mount a tandem axle trailer fender. If you are needing a replacement trailer fender as well check out Tandem Axle Aluminum Diamond Plate Trailer Fenders. ]]> <![CDATA[(PAIR) Aluminum Boat Trailer Round Fender Mount and Step Pads]]> https://www.boattrailerparts.com/PAIR-Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pads_p_1088.html Wed, 7 Oct 2026 00:00:00 EST This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly th...[Read More]
Our Price: $47.04 [Add to Cart]


]]> https://www.boattrailerparts.com/PAIR-Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pads_p_1088.html This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly th...[Read More]
Our Price: $47.04 [Add to Cart]


]]> This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly these round fender pads mount with Trailer Bolts to the bottom of the aluminum I-Beam on a boat trailer. This allows the other side to be used as a safe step, and an angled surface to mount the trailer fender. Check the attached images to ensure this is the product for you. These are also available with a flat face to accommodate square trailer fenders. You will notice that when these are put opposing one another, they will accommodate the round trailer fender between the two. We sell these by the pair to make it easy to identify which side you will need. A pair of these can be used on the passenger side or the drive side of the boat trailer. If you are needing a replacement trailer fender as well check out Tandem Axle Aluminum Diamond Plate Trailer Fenders. ]]> <![CDATA[Plastic Trailer Fender for Boat Trailer 8 inch x 20.5 inch x 5.25 inch]]> https://www.boattrailerparts.com/Plastic-Trailer-Fender-for-Boat-Trailer-8-inch-x-205-inch-x-525-inch_p_1089.html Wed, 7 Oct 2026 00:00:00 EST This is a Plastic Boat Trailer Fender for a Single Axle. Check the attached images for the specific measurements on this plastic fender. There are also many available mounting brackets for this fender here Boat Trailer Fender Mounting Brackets. There...[Read More]
Our Price: $15.26 [Add to Cart]


]]> https://www.boattrailerparts.com/Plastic-Trailer-Fender-for-Boat-Trailer-8-inch-x-205-inch-x-525-inch_p_1089.html This is a Plastic Boat Trailer Fender for a Single Axle. Check the attached images for the specific measurements on this plastic fender. There are also many available mounting brackets for this fender here Boat Trailer Fender Mounting Brackets. There...[Read More]
Our Price: $15.26 [Add to Cart]


]]> This is a Plastic Boat Trailer Fender for a Single Axle. Check the attached images for the specific measurements on this plastic fender. There are also many available mounting brackets for this fender here Boat Trailer Fender Mounting Brackets. There is no right or left for this fender. You would need to order (2) to complete a single axle trailer. In addition to the Trailer fender mounting brackets you will need additional Boat Trailer U-Bolts and Trailer Bolts to completely install the plastic fender to the galvanized fender brackets. ]]> <![CDATA[Single Axle Aluminum Smooth Trailer Fender 10.75 x 32 x 15]]> https://www.boattrailerparts.com/Single-Axle-Aluminum-Smooth-Trailer-Fender-1075-x-32-x-15_p_1407.html Wed, 7 Oct 2026 00:00:00 EST This Listing is for a Single Axle Aluminum Smooth Trailer Fender to outfit any type of trailer. You will notice from the picture, that this fender has one Radius Bended End and one 90 Degree End Bend. Typically this means that the 90 Degree Bend is t...[Read More]
Our Price: $63.14 [Add to Cart]


]]> https://www.boattrailerparts.com/Single-Axle-Aluminum-Smooth-Trailer-Fender-1075-x-32-x-15_p_1407.html This Listing is for a Single Axle Aluminum Smooth Trailer Fender to outfit any type of trailer. You will notice from the picture, that this fender has one Radius Bended End and one 90 Degree End Bend. Typically this means that the 90 Degree Bend is t...[Read More]
Our Price: $63.14 [Add to Cart]


]]> This Listing is for a Single Axle Aluminum Smooth Trailer Fender to outfit any type of trailer. You will notice from the picture, that this fender has one Radius Bended End and one 90 Degree End Bend. Typically this means that the 90 Degree Bend is the Side that will go towards the trailer. On a Cargo or Enclosed Trailer, this would mount directly to the side of the trailer with different types of hardware, depending upon the design of the trailer. This fender size is very common with 13" to 15" Trailer tires and will outfit nearly any brand of enclosed or cargo trailer.
Additionally, as this is an Aluminum Trailer Fender, it will not rust, so if you desire to, this fender would be great for boat trailers as well.
This Fender Measures 10.75 inches Wide, 32 inches Long, and 15 inches tall.
]]> <![CDATA[Weld In Fender Back Steel 30 Inch Length 12 Inch Tall For Single Axle Fender]]> https://www.boattrailerparts.com/Weld-In-Fender-Back-Steel-30-Inch-Length-12-Inch-Tall-For-Single-Axle-Fender_p_1423.html Wed, 7 Oct 2026 00:00:00 EST This Item is a Replacement Fender Back for 32 inch Long Cold Rolled Steel Single Axle Trailer Fenders. This Fender Back is Raw Steel, and is intended to be welded into the 90 Degree Beck Portion ( The Back) of your trailers single axle round fender. ...[Read More]
Our Price: $12.82 [Add to Cart]


]]> https://www.boattrailerparts.com/Weld-In-Fender-Back-Steel-30-Inch-Length-12-Inch-Tall-For-Single-Axle-Fender_p_1423.html This Item is a Replacement Fender Back for 32 inch Long Cold Rolled Steel Single Axle Trailer Fenders. This Fender Back is Raw Steel, and is intended to be welded into the 90 Degree Beck Portion ( The Back) of your trailers single axle round fender. ...[Read More]
Our Price: $12.82 [Add to Cart]


]]> This Item is a Replacement Fender Back for 32 inch Long Cold Rolled Steel Single Axle Trailer Fenders. This Fender Back is Raw Steel, and is intended to be welded into the 90 Degree Beck Portion ( The Back) of your trailers single axle round fender. Using this Item additionally allows your trailer protection from road debris, dirt, and mud. You can review the dimensions of this Fender Back in the pictures, but typically you would use this fender back on a Round Cold Rolled Steel Single Axle Single that would measure 32 inches long and around 15 inches high. When installed, the Fender Back Covers most of the Fender opening, but typically some extra portion of the fender will stick down below the fender back. ]]> <![CDATA[Tandem Axle Cold Rolled Steel Trailer Fender Teardrop 9 x 72 x 20.5]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-9-x-72-x-205_p_1425.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $290.93 [Add to Cart]


]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-9-x-72-x-205_p_1425.html This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $290.93 [Add to Cart]


]]> This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer, or mounted with hardware (not included). These fenders are raw steel, so they would typically be painted after installation to further prevent weathering. This Fender measures 9 inches Wide x 72 inches Long x 20 1/2 inches tall. You will see from the product photos that this fender has one radius side, which would be the outer side, and one 90 Degree bend side, which would be the side that mounts to the trailer. ]]> <![CDATA[Tandem Axle Cold Rolled Steel Trailer Fender Teardrop 9 x 66 x 16.5]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-9-x-66-x-165_p_1426.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $138.30 [Add to Cart]


]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-9-x-66-x-165_p_1426.html This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $138.30 [Add to Cart]


]]> This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer, or mounted with hardware (not included). These fenders are raw steel, so they would typically be painted after installation to further prevent weathering. This Fender measures 9 inches Wide x 66 inches Long x 16 1/2 inches tall. You will see from the product photos that this fender has one radius side, which would be the outer side, and one 90 Degree bend side, which would be the side that mounts to the trailer. ]]> <![CDATA[Tandem Axle Cold Rolled Steel Trailer Fender Teardrop 10.75 x 72 x 20.5]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-1075-x-72-x-205_p_1427.html Wed, 7 Oct 2026 00:00:00 EST This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $331.58 [Add to Cart]


]]> https://www.boattrailerparts.com/Tandem-Axle-Cold-Rolled-Steel-Trailer-Fender-Teardrop-1075-x-72-x-205_p_1427.html This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer...[Read More]
Our Price: $331.58 [Add to Cart]


]]> This is a Cold Rolled Steel Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be welded to the frame of the trailer, or mounted with hardware (not included). These fenders are raw steel, so they would typically be painted after installation to further prevent weathering. This Fender measures 10.75 inches Wide x 72 inches Long x 20 1/2 inches tall. You will see from the product photos that this fender has one radius side, which would be the outer side, and one 90 Degree bend side, which would be the side that mounts to the trailer. ]]> <![CDATA[Tandem Axle Aluminum Smooth Trailer Fender Teardrop 9 x 72 x 20]]> https://www.boattrailerparts.com/Tandem-Axle-Aluminum-Smooth-Trailer-Fender-Teardrop-9-x-72-x-20_p_1428.html Wed, 7 Oct 2026 00:00:00 EST This is a Aluminum Smooth Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be mounted to the frame of the trailer ...[Read More]
Our Price: $403.29 [Add to Cart]


]]> https://www.boattrailerparts.com/Tandem-Axle-Aluminum-Smooth-Trailer-Fender-Teardrop-9-x-72-x-20_p_1428.html This is a Aluminum Smooth Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be mounted to the frame of the trailer ...[Read More]
Our Price: $403.29 [Add to Cart]


]]> This is a Aluminum Smooth Tandem Axle Trailer Fender with a Tear Drop in the Center. This Style of Fender is very common on enclosed trailers, equipment trailers, and cargo trailers. Typically this fender would be mounted to the frame of the trailer with hardware (not included). These fenders are smooth aluminum, so they are light weight, and ideal for trailers spending a lot of time outside to prevent corrosion or weathering. This Fender measures 9 inches Wide x 72 inches Long x 20 inches tall. You will see from the product photos that this fender has one radius side, which would be the outer side, and one 90 Degree bend side, which would be the side that mounts to the trailer. ]]> <![CDATA[Plastic Single Axle Boat Trailer Fender 26 1/4 in x 8 in x 8 in Tapered Bracketless]]> https://www.boattrailerparts.com/Plastic-Single-Axle-Boat-Trailer-Fender-26-14-in-x-8-in-x-8-in-Tapered-Bracketless_p_2229.html Wed, 7 Oct 2026 00:00:00 EST This Plastic Boat Trailer Fender is known as a Frame Mount fender, which means it installs directly to your trailer frame using the bolt holes in the fender, without a need for brackets. The fender does not come with mounting hardware, but we have ma...[Read More]
Our Price: $19.15 [Add to Cart]


]]> https://www.boattrailerparts.com/Plastic-Single-Axle-Boat-Trailer-Fender-26-14-in-x-8-in-x-8-in-Tapered-Bracketless_p_2229.html This Plastic Boat Trailer Fender is known as a Frame Mount fender, which means it installs directly to your trailer frame using the bolt holes in the fender, without a need for brackets. The fender does not come with mounting hardware, but we have ma...[Read More]
Our Price: $19.15 [Add to Cart]


]]> This Plastic Boat Trailer Fender is known as a Frame Mount fender, which means it installs directly to your trailer frame using the bolt holes in the fender, without a need for brackets. The fender does not come with mounting hardware, but we have many sizes available to help you install this fender, they can be found at our Trailer Bolts Category.

This Black Single Axle Plastic Trailer Fender is designed for use with 8 inch to 12 inch Trailer Tires and Wheels, and is made of tough and reliable ABS Plastic, which is designed to stand up to the heat and outdoor elements without cracking or warping. This Fender also features a Tapered design, at it's widest point it measures 26 1/4", but it narrows as the fender comes out from the trailer frame, down to about 21 1/2". The height is 8 inches, and the depth (how far away from the frame it sticks out) is also about 8 inches.

Plastic Fenders are great for smaller boat trailers, Jet Ski Trailers, or other PWC Trailers since they look great and don't add a lot of cost to the trailer.

Features:
- Black ABS Plastic
- Tapered Design
- 26 1/4" - 21 1/2" on the width, 8" Height x 8" Depth
- Bracketless, also known as Frame Mount Style Fender
- Hardware not included
]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 19 inch for Tandem Axle Fenders]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-19-inch-for-Tandem-Axle-Fenders_p_2238.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $12.46 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-19-inch-for-Tandem-Axle-Fenders_p_2238.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $12.46 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple of different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one.

This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle Trailer you would only need (1) support per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.

Features:
- 1/4" thick aluminum
- uses 3/8" diameter hardware (not included)
- 45 degree bends on each end, 90 degree installation angle
- 19 inches overall, 16 inch on the center portion, and 1 1/2" per foot
]]> <![CDATA[Aluminum Boat Trailer Square Fender Mount and Step Pad 15 Inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-Inch_p_2261.html Wed, 7 Oct 2026 00:00:00 EST This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like...[Read More]
Our Price: $26.96 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-Inch_p_2261.html This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like...[Read More]
Our Price: $26.96 [Add to Cart]


]]> This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like the Aluminum Boat Trailer Round Fender Mount.


This knurled Aluminum Trailer Fender Step is 15" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability when used as a step. Typically a trailer would have 2 of these mounting brackets per Fender, and 4 total. This listing is for the Boat Trailer Fender Step Pad only, if you are adding these Fender Mounts to your Trailer for the first time you might like our Aluminum Boat Trailer Square Fender Mount With Cap, which is a combo that includes this same Fender Step and a 2 x 4 rubber cap to give the Trailer Fender Step a completed and clean look.


There are no Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. You can choose to either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket to allow for a U Bolt installation over your Trailer Frame instead.


Features:

- Aluminum Construction

- 15" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

]]> <![CDATA[Aluminum Boat Trailer Round Fender Mount and Step Pad 15 1/2 Inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pad-15-12-Inch_p_2262.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat...[Read More]
Our Price: $21.53 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pad-15-12-Inch_p_2262.html This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat...[Read More]
Our Price: $21.53 [Add to Cart]


]]> This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat trailer, utility trailer, or any other trailer.


The Aluminum Trailer Fender Step is 15 1/2" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability when used as a step. Typically a trailer would have 2 of these mounting brackets per Fender, and 4 total. This listing is for the Boat Trailer Fender Step Pad only, if you are adding these Fender Mounts to your Trailer for the first time you might like our Aluminum Boat Trailer Round Fender Mounts With Caps, which is a combo that includes a pair of this same Fender Step as well as 2 x 4 rubber caps to give the Trailer Fender Steps a completed and clean look.


There are no Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. You can choose to either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket to allow for a U Bolt installation over your Trailer Frame instead.

Features:

- Aluminum Construction

- 15 1/2" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

]]> <![CDATA[Rubber Trailer Fender Step Cap for Angled Fender Mounts Right Hand]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Right-Hand_p_2332.html Wed, 7 Oct 2026 00:00:00 EST This is the Right Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fend...[Read More]
Our Price: $5.07 [Add to Cart]


]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Right-Hand_p_2332.html This is the Right Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fend...[Read More]
Our Price: $5.07 [Add to Cart]


]]>
The Trailer Fender Step Cap will fit over the Right Hand Side of a Standard 2x4 Angled Fender Step/Mount, which are used for installing Round Trailer Fenders. The Caps are Left and Right Side Dependant, but the Steps themselves are not. The Step/Mounts can be rotated 180 degrees and be used on either the left or right side of the fender, but the caps need to be positioned according to how they are manufactured. The Left and Right Fender Caps have 2 different designs, so they can easily be told apart in catalogs and in person, but they still match in overall design so that they look good on your trailer.


Features:
- Fits 2x4 Angled Trailer Fender Steps
- Right Side
- Durable Rubber Construction
]]> <![CDATA[Rubber Trailer Fender Step Cap for Angled Fender Mounts Left Hand]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Left-Hand_p_2335.html Wed, 7 Oct 2026 00:00:00 EST This is the Left Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fende...[Read More]
Our Price: $5.08 [Add to Cart]


]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Left-Hand_p_2335.html This is the Left Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fende...[Read More]
Our Price: $5.08 [Add to Cart]


]]>
The Trailer Fender Step Cap will fit over the Left Hand Side of a Standard 2x4 Angled Fender Step/Mount, which are used for installing Round Trailer Fenders. The Caps are Left and Right Side Dependant, but the Steps themselves are not. The Step/Mounts can be rotated 180 degrees and be used on either the left or Left side of the fender, but the caps need to be positioned according to how they are manufactured. The Right and Left Fender Caps have 2 different designs, so they can easily be told apart in catalogs and in person, but they still match in overall design so that they look good on your trailer.


Features:
- Fits 2x4 Angled Trailer Fender Steps
- Left Side
- Durable Rubber Construction
]]> <![CDATA[Round Aluminum Boat Trailer Fender Mount and Step Pad with Right Hand Cap 15 1/2 Inch]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Right-Hand-Cap-15-12-Inch_p_2387.html Wed, 7 Oct 2026 00:00:00 EST This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh w...[Read More]
Our Price: $23.05 [Add to Cart]


]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Right-Hand-Cap-15-12-Inch_p_2387.html This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh w...[Read More]
Our Price: $23.05 [Add to Cart]


]]> This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh water applications. If you have a Square Fender, check out the Aluminum Boat Trailer Fender Mount for Square Trailer Fenders.


The Aluminum Trailer Fender Step measures 15 1/2" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability if you ever plan on using it as a step. Typically a trailer would have 2 of these mounting brackets per Fender, so 4 total for your entire trailer. This listing includes the Right Hand Fender Step Cap. This way, if one of your steps gets damaged (or if you prefer to buy parts individually) you can get exactly what you need. If you are adding these Fender Mounts to your Trailer for the first time, however, you might like our (Pair of) Aluminum Boat Trailer Round Fender Mounts With Caps, which is a combo that includes a pair of Steps and Caps for your Trailer, including this Right Hand as well as the Matching Left Hand Side.


This fender mount does not come with Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. In most cases, you will either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket and use a U Bolt over your Trailer Frame instead for installation.

Features:

- Aluminum Construction

- 15 1/2" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

- Rubber Cap is Included (Right Side)

]]>