<![CDATA[BoatTrailerParts.com: ]]> https://www.boattrailerparts.com Wed, 7 Oct 2026 00:00:00 EST en-us <![CDATA[3/8 inch Diameter by 1 1/4 inch Long Stainless Steel Bolt ]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Stainless-Steel-Bolt-_p_976.html Wed, 7 Oct 2026 00:00:00 EST This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the b...[Read More]
Our Price: $1.67 [Add to Cart]


]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Stainless-Steel-Bolt-_p_976.html This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the b...[Read More]
Our Price: $1.67 [Add to Cart]


]]> This Stainless Steel Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt you are needing to complete your project. This listing is for (1) Bolt and also includes (2) Stainless Steel Washers, (1) Stainless Steel Lock Washer, and (1) Stainless Steel Hex Nut
A: 1 1/4 inches
D: 3/8-16 Thread

]]> <![CDATA[3/8 inch Diameter by 1 1/4 inch Long Zinc Plated Bolt ]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Zinc-Plated-Bolt-_p_987.html Wed, 7 Oct 2026 00:00:00 EST This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt ...[Read More]
Our Price: $1.89 [Add to Cart]


]]> https://www.boattrailerparts.com/38-inch-Diameter-by-1-14-inch-Long-Zinc-Plated-Bolt-_p_987.html This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt ...[Read More]
Our Price: $1.89 [Add to Cart]


]]> This Zinc Plated Bolt is perfect for preventing corrosion and rust. Great for Boat or Utility Trailer! This Bolt can be used for anything! Check the measurement diagram in the photos and look below to see the exact measurements and match up the bolt you are needing to complete your project. This listing is for (1) Bolt and also includes (2) Galvanized Flat Washers, (1) Galvanized Lock Washer, and (1) Zinc Plated Hex Nut
A: 1 1/4 inches
D: 3/8-16 Thread
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 5 1/4 in x 6 inch L Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-5-14-in-x-6-inch-L-Shape_p_1078.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axl...[Read More]
Our Price: $8.15 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-5-14-in-x-6-inch-L-Shape_p_1078.html This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axl...[Read More]
Our Price: $8.15 [Add to Cart]


]]> This is a Hot-Dipped Galvanized L-Shape Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat trailer, you would use two of these fender brackets to mount your Single Axle Trailer Fenders. These Galvanized Fender Brackets are most commonly seen on smaller Galvanized and Aluminum Fenders used for 13 inch tires and down to 8 inch trailer tires. You would mount one towards the front and one towards the rear of the fender , we have Boat Trailer U-Bolts and Trailer Bolts available if you are needing mounting hardware.
Be sure to check the pictures to make sure the measurements in the photo are the correct size and spacing for your project. This is a listing for (1) Bracket, you would commonly need (2) to replace an entire fender.
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 7 1/2 in x 5 3/4 inch L Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-7-12-in-x-5-34-inch-L-Shape_p_1079.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat t...[Read More]
Our Price: $10.45 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-7-12-in-x-5-34-inch-L-Shape_p_1079.html This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat t...[Read More]
Our Price: $10.45 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat trailer, you would use two of these fender brackets to mount your Single Axle Trailer Fenders. These Galvanized L Shape Fender Brackets are most commonly seen on smaller Galvanized and Aluminum Fenders used for 13 inch tires and down to 8 inch trailer tires. You would mount one towards the front and one towards the rear of the fender , we have Boat Trailer U-Bolts and Trailer Bolts available if you are needing mounting hardware. The holes that are pre-drilled in this fender bracket are for 3/8 inch diameter bolts. This Single Axle Fender Bracket is very similar to another one we have available, but measures longer on both leg portions and has different hole spacing, so be careful identify which one is more ideal for your application.
Be sure to check the pictures to make sure the measurements in the photo are the correct size and spacing for your project. This is a listing for (1) Bracket, you would commonly need (2) to replace an entire fender.
]]> <![CDATA[Boat Trailer Fender Mounting Bracket 4 in x 7 1/2 inch L-Shape]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-4-in-x-7-12-inch-L-Shape_p_1080.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bol...[Read More]
Our Price: $6.51 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Mounting-Bracket-4-in-x-7-12-inch-L-Shape_p_1080.html This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bol...[Read More]
Our Price: $6.51 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Single Axle Trailer Fender Mounting Bracket. This L-Shape Boat Trailer Fender Bracket is unique to other brackets in that it has square holes, rather than round. This allows the use of carriage bolts or regular hex bolts for mounting. The correct Boat Trailer U-Bolt or Trailer Bolt is 3/8 inch in diameter. Check the pictures with the lengths of the bracket to ensure this one will work for you. Typically you would need (2) of these brackets in order to replace one trailer fender. This listing is one for (1) Fender bracket. If you are needing to replace your trailer fenders as well check out our Single Axle Trailer Fenders to select the correct size you are looking for. ]]> <![CDATA[Boat Trailer Fender Bracket with Double Bend Large for Single Axle ]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Bracket-with-Double-Bend-Large-for-Single-Axle-_p_1082.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This sligh...[Read More]
Our Price: $15.47 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Fender-Bracket-with-Double-Bend-Large-for-Single-Axle-_p_1082.html This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This sligh...[Read More]
Our Price: $15.47 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Large Double Bend Single Axle Trailer Fender Mounting Bracket. This Double Bend Wide U-Shaped Boat Trailer Fender Bracket is unique to other brackets in that it is not the typically 90 Degree Angled Bracket. This slightly rounded Fender Bracket is slightly angled to mount your trailers fender. Each bend that you see is roughly 45 Degrees. The correct Boat Trailer U-Bolt or Trailer Bolt is 3/8 inch in diameter. Be sure to check the correct length of U-Bolt or Bolts you will need, as we have many sizes available. Check the pictures with the lengths of the bracket to ensure this one will work for you. Typically you would need (2) of these brackets in order to replace one single axle trailer fender. However, smaller fenders may mount using (1) fender bracket. This listing is one for (1) Fender bracket. If you are needing to replace your trailer fenders as well check out our Single Axle Trailer Fenders to select the correct size you are looking for. ]]> <![CDATA[Boat Trailer Galvanized Fender Mounting Bracket Step Pad]]> https://www.boattrailerparts.com/Boat-Trailer-Galvanized-Fender-Mounting-Bracket-Step-Pad_p_1083.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your si...[Read More]
Our Price: $13.31 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Galvanized-Fender-Mounting-Bracket-Step-Pad_p_1083.html This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your si...[Read More]
Our Price: $13.31 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Boat Trailer Fender Step Pad Mounting Bracket that is commonly used also as a step and to mount trailer lights. Check the images attached and the measurements to ensure that this is the right fender bracket for your single axle boat trailer. This Fender bracket has varying holes diameters and spacing, which are shown on the images, so select hardware carefully, measure the Boat Trailer U-Bolts and Trailer Bolts to ensure a successful install. Also, keep in mind these are normally replaced in pairs while replacing your Single Axle Trailer Fenders. The holes you see on the top surface of the fender bracket are the ones you would use to mount this bracket to the frame. Therefore, the side with the two holes on top faces the trailer frame, with the other end, (where you see the two slotted 3/8 inch holes) mounting the trailer fenders. ]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 15 inch for Tandem Axle]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-15-inch-for-Tandem-Axle_p_1084.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $11.96 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-15-inch-for-Tandem-Axle_p_1084.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $11.96 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 17 inch for Tandem Axle ]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-17-inch-for-Tandem-Axle-_p_1085.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $13.66 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-17-inch-for-Tandem-Axle-_p_1085.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $13.66 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
]]> <![CDATA[Aluminum Boat Trailer Square Fender Mount and Step Pad 15 inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-inch_p_1087.html Wed, 7 Oct 2026 00:00:00 EST This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the...[Read More]
Our Price: $30.05 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-inch_p_1087.html This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the...[Read More]
Our Price: $30.05 [Add to Cart]


]]> This is a Square Shaped Solid Aluminum Fender Mount and Step Pad. This listing is for (1) Square Shaped Aluminum Fender mount. This item has NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount this to the trailer. Most commonly this square fender pad mounts with Trailer Bolts to the I-Beam of a boat trailer on the side that does not have the black cover pad. This allows the other side to be used as a safe step, and a flat square surface to mount the trailer fender. Check the attached images to ensure this is the product for you. These are also available with angles to accommodate round trailer fenders. You would commonly need (2) of these to mount a tandem axle trailer fender. If you are needing a replacement trailer fender as well check out Tandem Axle Aluminum Diamond Plate Trailer Fenders. ]]> <![CDATA[(PAIR) Aluminum Boat Trailer Round Fender Mount and Step Pads]]> https://www.boattrailerparts.com/PAIR-Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pads_p_1088.html Wed, 7 Oct 2026 00:00:00 EST This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly th...[Read More]
Our Price: $47.04 [Add to Cart]


]]> https://www.boattrailerparts.com/PAIR-Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pads_p_1088.html This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly th...[Read More]
Our Price: $47.04 [Add to Cart]


]]> This is one Pair of Aluminum Fender Mounts or Step Pads designed to be used with round fenders. These step pads have NO pre-drilled holes, therefore holes would need to be drilled once it is determined how to mount it to the trailer. Most commonly these round fender pads mount with Trailer Bolts to the bottom of the aluminum I-Beam on a boat trailer. This allows the other side to be used as a safe step, and an angled surface to mount the trailer fender. Check the attached images to ensure this is the product for you. These are also available with a flat face to accommodate square trailer fenders. You will notice that when these are put opposing one another, they will accommodate the round trailer fender between the two. We sell these by the pair to make it easy to identify which side you will need. A pair of these can be used on the passenger side or the drive side of the boat trailer. If you are needing a replacement trailer fender as well check out Tandem Axle Aluminum Diamond Plate Trailer Fenders. ]]> <![CDATA[Aluminum Boat Trailer Fender or Bunk Support 19 inch for Tandem Axle Fenders]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-19-inch-for-Tandem-Axle-Fenders_p_2238.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $12.46 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Fender-or-Bunk-Support-19-inch-for-Tandem-Axle-Fenders_p_2238.html This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mountin...[Read More]
Our Price: $12.46 [Add to Cart]


]]> This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple of different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one.

This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle Trailer you would only need (1) support per fender, so replacing two fenders would mean needing two of these supports.

Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.

Features:
- 1/4" thick aluminum
- uses 3/8" diameter hardware (not included)
- 45 degree bends on each end, 90 degree installation angle
- 19 inches overall, 16 inch on the center portion, and 1 1/2" per foot
]]> <![CDATA[Aluminum Boat Trailer Square Fender Mount and Step Pad 15 Inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-Inch_p_2261.html Wed, 7 Oct 2026 00:00:00 EST This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like...[Read More]
Our Price: $26.96 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Square-Fender-Mount-and-Step-Pad-15-Inch_p_2261.html This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like...[Read More]
Our Price: $26.96 [Add to Cart]


]]> This Aluminum Fender Step Pad is designed for use with a Square Trailer Fender with a Straight Vertical Side. If you have a Round Fender, you would need a similar product, but one that has an angled side to match the curvature of a Round Fender, like the Aluminum Boat Trailer Round Fender Mount.


This knurled Aluminum Trailer Fender Step is 15" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability when used as a step. Typically a trailer would have 2 of these mounting brackets per Fender, and 4 total. This listing is for the Boat Trailer Fender Step Pad only, if you are adding these Fender Mounts to your Trailer for the first time you might like our Aluminum Boat Trailer Square Fender Mount With Cap, which is a combo that includes this same Fender Step and a 2 x 4 rubber cap to give the Trailer Fender Step a completed and clean look.


There are no Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. You can choose to either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket to allow for a U Bolt installation over your Trailer Frame instead.


Features:

- Aluminum Construction

- 15" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

]]> <![CDATA[Aluminum Boat Trailer Round Fender Mount and Step Pad 15 1/2 Inch]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pad-15-12-Inch_p_2262.html Wed, 7 Oct 2026 00:00:00 EST This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat...[Read More]
Our Price: $21.53 [Add to Cart]


]]> https://www.boattrailerparts.com/Aluminum-Boat-Trailer-Round-Fender-Mount-and-Step-Pad-15-12-Inch_p_2262.html This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat...[Read More]
Our Price: $21.53 [Add to Cart]


]]> This is an Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and it has an Angled Side to match the Curvature of a Round Fender. Step pads like these are used to attach fenders and add a step surface to better access your boat trailer, utility trailer, or any other trailer.


The Aluminum Trailer Fender Step is 15 1/2" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability when used as a step. Typically a trailer would have 2 of these mounting brackets per Fender, and 4 total. This listing is for the Boat Trailer Fender Step Pad only, if you are adding these Fender Mounts to your Trailer for the first time you might like our Aluminum Boat Trailer Round Fender Mounts With Caps, which is a combo that includes a pair of this same Fender Step as well as 2 x 4 rubber caps to give the Trailer Fender Steps a completed and clean look.


There are no Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. You can choose to either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket to allow for a U Bolt installation over your Trailer Frame instead.

Features:

- Aluminum Construction

- 15 1/2" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

]]> <![CDATA[Rubber Trailer Fender Step Cap for Angled Fender Mounts Right Hand]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Right-Hand_p_2332.html Wed, 7 Oct 2026 00:00:00 EST This is the Right Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fend...[Read More]
Our Price: $5.07 [Add to Cart]


]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Right-Hand_p_2332.html This is the Right Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fend...[Read More]
Our Price: $5.07 [Add to Cart]


]]>
The Trailer Fender Step Cap will fit over the Right Hand Side of a Standard 2x4 Angled Fender Step/Mount, which are used for installing Round Trailer Fenders. The Caps are Left and Right Side Dependant, but the Steps themselves are not. The Step/Mounts can be rotated 180 degrees and be used on either the left or right side of the fender, but the caps need to be positioned according to how they are manufactured. The Left and Right Fender Caps have 2 different designs, so they can easily be told apart in catalogs and in person, but they still match in overall design so that they look good on your trailer.


Features:
- Fits 2x4 Angled Trailer Fender Steps
- Right Side
- Durable Rubber Construction
]]> <![CDATA[Rubber Trailer Fender Step Cap for Angled Fender Mounts Left Hand]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Left-Hand_p_2335.html Wed, 7 Oct 2026 00:00:00 EST This is the Left Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fende...[Read More]
Our Price: $5.08 [Add to Cart]


]]> https://www.boattrailerparts.com/Rubber-Trailer-Fender-Step-Cap-for-Angled-Fender-Mounts-Left-Hand_p_2335.html This is the Left Hand Rubber Trailer Fender Step Cap for Angled Trailer Fender Mounts. This Black Rubber End Cap is made of a durable outdoor rubber material that won't break down in the elements, and is great for on Boat Trailers with aluminum Fende...[Read More]
Our Price: $5.08 [Add to Cart]


]]>
The Trailer Fender Step Cap will fit over the Left Hand Side of a Standard 2x4 Angled Fender Step/Mount, which are used for installing Round Trailer Fenders. The Caps are Left and Right Side Dependant, but the Steps themselves are not. The Step/Mounts can be rotated 180 degrees and be used on either the left or Left side of the fender, but the caps need to be positioned according to how they are manufactured. The Right and Left Fender Caps have 2 different designs, so they can easily be told apart in catalogs and in person, but they still match in overall design so that they look good on your trailer.


Features:
- Fits 2x4 Angled Trailer Fender Steps
- Left Side
- Durable Rubber Construction
]]> <![CDATA[Round Aluminum Boat Trailer Fender Mount and Step Pad with Right Hand Cap 15 1/2 Inch]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Right-Hand-Cap-15-12-Inch_p_2387.html Wed, 7 Oct 2026 00:00:00 EST This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh w...[Read More]
Our Price: $23.05 [Add to Cart]


]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Right-Hand-Cap-15-12-Inch_p_2387.html This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh w...[Read More]
Our Price: $23.05 [Add to Cart]


]]> This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the curvature of a Round Fender. This fender step is perfect for boat owners, as the aluminum finish will withstand those harsh salt or fresh water applications. If you have a Square Fender, check out the Aluminum Boat Trailer Fender Mount for Square Trailer Fenders.


The Aluminum Trailer Fender Step measures 15 1/2" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability if you ever plan on using it as a step. Typically a trailer would have 2 of these mounting brackets per Fender, so 4 total for your entire trailer. This listing includes the Right Hand Fender Step Cap. This way, if one of your steps gets damaged (or if you prefer to buy parts individually) you can get exactly what you need. If you are adding these Fender Mounts to your Trailer for the first time, however, you might like our (Pair of) Aluminum Boat Trailer Round Fender Mounts With Caps, which is a combo that includes a pair of Steps and Caps for your Trailer, including this Right Hand as well as the Matching Left Hand Side.


This fender mount does not come with Pre-Drilled Holes on this Bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. In most cases, you will either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket and use a U Bolt over your Trailer Frame instead for installation.

Features:

- Aluminum Construction

- 15 1/2" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

- Rubber Cap is Included (Right Side)

]]> <![CDATA[Round Aluminum Boat Trailer Fender Mount and Step Pad with Left Hand Cap 15 1/2 Inch]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Left-Hand-Cap-15-12-Inch_p_2388.html Wed, 7 Oct 2026 00:00:00 EST This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the Curvature of a Round Fender. This fender step is perfect for marine applications because it is made out of aluminum, and will hold in up ha...[Read More]
Our Price: $23.29 [Add to Cart]


]]> https://www.boattrailerparts.com/Round-Aluminum-Boat-Trailer-Fender-Mount-and-Step-Pad-with-Left-Hand-Cap-15-12-Inch_p_2388.html This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the Curvature of a Round Fender. This fender step is perfect for marine applications because it is made out of aluminum, and will hold in up ha...[Read More]
Our Price: $23.29 [Add to Cart]


]]> This Aluminum Fender Step Pad is designed for use with a Round Trailer Fender, and its angled side matches the Curvature of a Round Fender. This fender step is perfect for marine applications because it is made out of aluminum, and will hold in up harsh salt or fresh water applications. If you have a Square Fender, check out this Aluminum Boat Trailer Fender Mount for Square Trailer Fenders.


This angled round Aluminum Trailer Fender Step is 15 1/2" long, 4" wide, and 2" in Height. It features a textured finish on top for added grip and stability when used as a step. Typically a trailer would have 2 of these mounting brackets per Fender, so (4) total. By purchasing this, you also get the Left Hand Fender Step Cap. This way, if one of your steps gets damaged (or if you prefer to buy parts individually) you can get exactly what you need. If you are adding these Fender Mounts to your Trailer for the first time, however, you might like our (Pair of) Aluminum Boat Trailer Round Fender Mounts With Caps, which is a combo that includes a pair of Steps and Caps for your Trailer, including this Left Hand as well as the Matching Right Hand Side.


There are no Pre-Drilled Holes on this knurled step bracket, so you can easily install this to your Aluminum I Beam Trailer and its Fenders wherever needed. You can choose to either bolt these directly through your I Beam or C Channel, or if your trailer has a full square tubing frame, you can drill holes in the Bracket to allow for a U Bolt installation over your Trailer Frame instead.

Features:

- Aluminum Angled Construction

- 15 1/2" x 4" x 2"

- No Pre-drilled holes

- Bolt On Installation

- Rubber Cap is Included (Left Side)

]]> <![CDATA[Boat Trailer Pre-Galvanized Fender Mounting Bracket for Small Plastic Fenders ]]> https://www.boattrailerparts.com/Boat-Trailer-Pre-Galvanized-Fender-Mounting-Bracket-for-Small-Plastic-Fenders-_p_2770.html Wed, 7 Oct 2026 00:00:00 EST This Trailer Fender Bracket is constructed of 1/8 width (11 gauge) pre-galvanized steel, meaning that the components are stamped from a pre-galvanized sheet of steel. This process means that the parts do have some measure of resistance to rust and co...[Read More]
Our Price: $4.78 [Add to Cart]


]]> https://www.boattrailerparts.com/Boat-Trailer-Pre-Galvanized-Fender-Mounting-Bracket-for-Small-Plastic-Fenders-_p_2770.html This Trailer Fender Bracket is constructed of 1/8 width (11 gauge) pre-galvanized steel, meaning that the components are stamped from a pre-galvanized sheet of steel. This process means that the parts do have some measure of resistance to rust and co...[Read More]
Our Price: $4.78 [Add to Cart]


]]> This Trailer Fender Bracket is constructed of 1/8" width (11 gauge) pre-galvanized steel, meaning that the components are stamped from a pre-galvanized sheet of steel. This process means that the parts do have some measure of resistance to rust and corrosion, but you can prime and paint or re-coat the brackets to provide even better protection for trailers in saltwater marine environments.

This Mounting bracket is sold individually, but you would need 2 per fender to properly secure the fender to your trailer. These brackets are specifically designed to fit the Black Plastic Boat Trailer Fenders for 8" - 12" Tires and Silver Plastic Boat Trailer Fenders for 8" - 12" Tires that we carry, and are shown mounted on one of the black fenders in the photos as an example.

This pre-galvanized boat trailer fender mounting bracket allows you to securely mount over a selection of small plastic trailer fenders for 8 to 12 inch trailer tires. The bracket has pre-drilled mounting holes to accommodate 7-inch width boat trailer fenders with 2 1/2" center-to-center mounting holes. The brackets will mount to your trailer frame and fender with 3/8" diameter trailer bolts of your preferred length (hardware not included with brackets).


These fender brackets are an easy and cost effective way to re-mount or add plastic trailer fenders to your saltwater or freshwater boat trailer!
]]>