This is a zinc-plated 9/16 inch diameter trailer hub stud, sized for 5,200 lb - 8,000 lb axle hubs with 6 or 8 lugs. The 9/16 inch stud has a length of 2 inches, commonly used on idler hubs, drum brake hubs, and integral disc brake rotors. The zinc-plated coating offers superior resistance to corrosion compared to standard steel studs, so this stud is perfect for boat trailers. You will install this stud by driving it into the back of your hub through the empty lug hole with a hammer or mallet, and then tightening down the stud with a lug nut and wrench until the stud is fully seated. From there you can back off the lug nut and reinstall your trailer tire and wheel assembly and get back out on the road safely. This is the ideal replacement stud for 6 - 8 lug hubs with 9/16 inch studs, allowing you to replace your compromised or missing hub studs and tow your boat or land trailer safely.
Specifications
- Stud Thread Diameter: 9/16"
- Threaded Length: 1.35"
- Stud Cap Diameter: 0.69"
- Overall Length: 2.00"
- Thread Pitch: 9/16" - 18
