Brought to You By Out Of The Box Parts

0 item(s) • $0 View Cart
Free Shipping Over $200

Trailer Bearing 67048 for 5,200 - 6,000lb (6 Lug) Trailer Axles, 1 1/4" ID

Item Sku:
Trailer Bearing 67048 for 5,200 - 6,000lb (6 Lug) Trailer Axles, 1 1/4" ID
Price: $5.54
In Stock
This Trailer Roller Bearing is the Standard Bearing Number 67048, which means it's designed to fit on the 1 1/4" portion of a Spindle, and into the Bearing Race # 67010.  This is a Tapered Roller-Style Bearing, which is the most common bearing type among Trailer Hubs.  This particular bearing is typically used on Trailers with a Capacity from 5,200lbs to 6,000lbs.  This Size Bearing is usually seen in 6 Lug Trailer Hubs, but it is not the only bearing size found in hubs of that capacity.  Additionally, the 15123 Bearing is commonly used in 6 Lug Trailer Hubs instead of this 67048.  They both have the same inner diameter, but they fit into different sized hubs.  For this reason, it's always best to check your Trailer Hubs and Axle to make sure you get a proper Bearing replacement for your Boat or Utility Trailer.

Bearing's need regular maintenance and Periodic replacement in order to keep your trailer in safe operating order.  Most of the time Bearings are replaced in pairs, along with the Trailer Grease Seal.  If you are looking to replace all of your trailer bearings and the grease seals, we do sell Trailer Bearing Kits on our website which could get you all the parts you need in one simple package.

To install a Bearing into your trailer hub, you need to start by Packing the Bearing full of grease.  Take a handful of Trailer Wheel Bearing Grease and press the bearing into it, rotating the bearing as you go to get grease in each of the individual rollers.  Once you've completely packed the bearing, simply drop it into your trailer Hub so it sits inside the matching Race.  Depending on if the Bearing is the Inner or Outer Bearing of the hub, it will be secured into place with either the Hub's Grease Seal or the Flat Washer and Locking Mechanism on your Trailer Spindle.

1 1/4" Inner Diameter
Fits Race 67010
Tapered Bearing
For 5,200lb-6,000lb Trailer Axles
Typically Used in 6 Lug Hubs

You May Also Like