This 30 ft Boat Trailer Wiring harness will replace your old or worn out boat trailer wiring to make it like new again! The Trailer End Connecter on this Wiring Cluster uses a 4 pin or 4 flat connector. This Harness uses color coded wires to send power to your trailer's lights and brake functions. The Colors are the same White, Green, Yellow, and Brown wires that all trailer harnesses use. The Functions of these wires are as follows: White (Ground Wire), Green (Right Turn), Yellow (Left Turn), and the Brown Wires Operate the Left and Right Side Running Lights.
A 4 Pin Wiring Harness is typically used on a trailer without brakes.
This 30ft length is perfect for longer boat trailers, or those wanting to wire their trailer up all the way to a set of lights at the top of their Boat Trailer Guide Poles. Each wire is 30ft long, including the 2 White Ground Wires. On most Trailer Wiring kits, the ground wire is only about 30 inches long, and is designed to install to the trailer tongue, closer to the tow vehicle end of the trailer. If your trailer is aluminum, you may experience grounding issues connecting directly to the frame like this. With a Wiring harness that features longer ground wires, you have the option to ground further down the trailer, on the steel studs your lights use, or even better, on a junction box that may not be located near the front of the trailer. This will give you a more reliable ground and your trailer's electric components will be less likely to experience issues.
This Wiring Harness is a 'wishbone' style harness , which means that it's designed to send (1) brown wire, (1) yellow wire, and (1) white ground wire down the left side of your trailer frame, and (1) brown wire, (1) green wire, and (1) white ground wire down the right side of your trailer frame to make installation easier and more straight forward.
Features:
- All Wires 30ft Long
- Wishbone Style Harness for Easier Installation
- 4 Pin Connector, also called a 4 Flat Connector.
