This product is a 8 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 8 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means your will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!
If you are mounting this 8 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST! In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!