This Painted Steel Round Trailer Axle has a carrying capacity of 2,000 lbs. This is a listing for the Axle beam and spindles. The Hubs are not included, but sold separately. The Spindles are welded into the beam of the Axle as pictured. These 2,000lb Round Steel Trailer Axles are made of round steel tubing that measures 1 3/4 inches in diameter. This 2,000 lb Painted Steel Trailer Axle will typically use 2000 lb Trailer Hubs with a 4 Lug or 5 Lug Pattern.
This 2,000 lb Trailer Axle has straight spindles that use the following bearing sizes and grease seal size:
Inner Bearing – 44649 or 1 1/16 inch inner diameter
Outer Bearing- 44649 or 1 1/16 inch inner diameter
Grease Seal- 1 1/2 inches inner diameter
These 2,000 lb Capacity Axles are intended for use with Standard Idler Hubs, meaning they are not intended for use with Trailer Brake Drums. The Castle Nut and Spindle Washer are included with the axle. Some of our Painted Steel Trailer Axles come with Pre-Mounted Spring Seats for specific measurements. The Axles listed without pre-mounted spring seats will include the spring seats for you, the customer to weld to your specific measurements. It is very important that you do not weld your spring seats outside the range listed. Using an axle to long may cause a leverage issue, leading to pre-mature bending or damaging to the ends of the axle. An axle that is to short will cause the tires to rub on the frame of the trailer.
Check the Hub Face Measurement and overall measurement below, as well as the if the Axle comes with pre-mounted spring seats.
Hub face measures: 57 inches
-Hub Face measurement refers to the outside face measurement, from one trailer hub across the axle to the outside face of the trailer hub across from it.
Overall length measures: 62 inches
Spring Seat Centers Measure: 46 inches